Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Servo Motor Selection

Status
Not open for further replies.
bucks7756

bucks7756

Electrical
Aug 4, 2005
12
I need to spec out an ac servo motor that will be controlled by an Allen Bradley ultra 3000i servo drive. The motor will be start/stopped about 9 times/minute so do I need to worry about overheating? The total inertia applied to the motor will be .0303 kg*m^2 and the motor will be running at about 2000rpm. Any help would be appreciated.
 
Status
Not open for further replies.

Similar threads

Y
  • Locked
  • Question
Stepper Motor Size Selection
Replies
0
Views
904
YoungSnapple
Y
Kash2013
  • Question
motor rotor material
Replies
6
Views
3K
panter
panter
K
  • Locked
  • Question
Motor Analysis
Replies
4
Views
2K
LionelHutz
LionelHutz
freetown
  • Locked
  • Question
induced voltage synchronous motor
Replies
11
Views
5K
waross
waross
Emad Shaaban
  • Question
Electrical motor with rotor issue 1
Replies
12
Views
5K
Emad Shaaban
Emad Shaaban

Part and Inventory Search

Sponsor

Back
Top Bottom