Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Selecting hidden surfaces 1

Status
Not open for further replies.
OptiEng

OptiEng

Mechanical
Joined
Oct 30, 2009
Messages
149
Location
GB
Hello All,

I am trying to select a surface not visible in the viewport. Dispite trying various views and "Select From Interior Entities" tool. I am still struggling with this. Any advice would be much appreciated.

Thanks.
 
Sort by date Sort by votes
Try removing the external faces from the display group until you peel back enough layers.

Rob Stupplebeen
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
410
mj345
mj345
mj345
  • Locked
  • Question Question
Selecting angled surfaces in a part using Python script
Replies
1
Views
356
FEA way
FEA way
F
  • Locked
  • Question Question
How can I obtain integrals over curves and surfaces?
Replies
1
Views
1K
FEA way
FEA way
ShiningEngineer
  • Locked
  • Question Question
Correct use of load definition in Abaqus on surfaces with varying values
Replies
14
Views
5K
ShiningEngineer
ShiningEngineer
SuCosta
  • Locked
  • Question Question
Selecting Experimental Tests for Accurate Rubber Behavior Simulation
Replies
3
Views
288
IceBreakerSours
IceBreakerSours

Part and Inventory Search

Sponsor

Back
Top