Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seismic Overstrength Factor for Foundations?

Status
Not open for further replies.
dengebre

dengebre

Structural
Joined
Jun 21, 2006
Messages
53
Location
US
Should the seismic overstrength factor (Omega) be used when determining the foundation design loads? I am specifically referring to the loads as they pertain to the soil-foundation interface, and not the design of the foundation itself.
 
Status
Not open for further replies.

Similar threads

yakpol
  • Locked
  • Question Question
Bearing Resistance of Culvert Foundations
Replies
3
Views
800
yakpol
yakpol
ONENGINEER
  • Locked
  • Question Question
FoS and Geotechnical Resistance Factor
Replies
7
Views
1K
GeoEnvGuy
GeoEnvGuy
beautifulhills
  • Locked
  • Question Question
Which software? Concrete foundations Preparation modeling complex multi level prior to calculations
Replies
2
Views
625
JoshPlumSE
JoshPlumSE
pelelo
  • Locked
  • Question Question
Meyerhof's correction factors for Bearing Capacity Calcs
Replies
2
Views
1K
Smoulder
Smoulder
Boiler106
  • Question Question
Augercast Pile Minimum Diameter for stability
Replies
4
Views
3K
ANE91
ANE91

Part and Inventory Search

Sponsor

Back
Top