Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Seismic Drift as per IBC
- Thread starter Murali27
- Start date
Story drift [Δ] is the difference between lateral deflections at each story level above and below the story you are checking.
The deflection at story x equals:
[δ]x = Cd ( [δ]xe) / I(E)
Cd is your magnification factor in table 1617.6
[δ]xe is the deflection of the floor level based on an elastic, first order analysis using the seismic design loads on the entire structure.
I(E) is simply the occupancy importance factor.
So once you calculate the [δ] at each floor, take them times Cd and divide by I(E), you have a [δ]x at each floor. Their difference is the [Δ] for each story which compares with the allowable story drifts in table 1617.3
The deflection at story x equals:
[δ]x = Cd ( [δ]xe) / I(E)
Cd is your magnification factor in table 1617.6
[δ]xe is the deflection of the floor level based on an elastic, first order analysis using the seismic design loads on the entire structure.
I(E) is simply the occupancy importance factor.
So once you calculate the [δ] at each floor, take them times Cd and divide by I(E), you have a [δ]x at each floor. Their difference is the [Δ] for each story which compares with the allowable story drifts in table 1617.3
- Status
