Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seeking help in bottom plug of well foundation

Status
Not open for further replies.
drokapil

drokapil

Structural
Joined
Jul 25, 2010
Messages
10
Location
NP
Dear All,

MORTH Specification recommends The bottom plug shall be provided in all wells and the top shall be kept not lower than 300
mm in the centre above the top of the curb, as shown in Appendix-3 of IRC:78. What might be the concept behind this? What if it is not so?Someone please clarify me.

thanks in Advance

Best Regards
Govinda
 
Status
Not open for further replies.

Similar threads

CJLCivilStruct
  • Question Question
Calculation of crack widths in foundation design
2
Replies
21
Views
21K
CJLCivilStruct
CJLCivilStruct
M
  • Question Question
Shear peaks in piled raft foundation
Replies
2
Views
4K
CJLCivilStruct
CJLCivilStruct
D
  • Question Question
HUD Foundation Inspections
2
Replies
22
Views
17K
phamENG
phamENG
bnickeson
  • Question Question
Deep epoxy embedment in foundation wall
2
Replies
21
Views
2K
bnickeson
bnickeson
TRAK.Structural
  • Question Question
Residential Slab Foundation
Replies
1
Views
4K
kissymoose
kissymoose

Part and Inventory Search

Sponsor

Back
Top