drokapil
Structural
- Jul 25, 2010
- 10
Dear All,
MORTH Specification recommends The bottom plug shall be provided in all wells and the top shall be kept not lower than 300
mm in the centre above the top of the curb, as shown in Appendix-3 of IRC:78. What might be the concept behind this? What if it is not so?Someone please clarify me.
thanks in Advance
Best Regards
Govinda
MORTH Specification recommends The bottom plug shall be provided in all wells and the top shall be kept not lower than 300
mm in the centre above the top of the curb, as shown in Appendix-3 of IRC:78. What might be the concept behind this? What if it is not so?Someone please clarify me.
thanks in Advance
Best Regards
Govinda