Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Section views in 3D model

Status
Not open for further replies.
mx2street

mx2street

Mechanical
May 26, 2005
64
What I was hoping to do is cut out just corner, via 2 sections, of an entire assy in the model view. All I've been able to achieve thus far is cutting away 3 corners and leaving one. I'm looking to do just the oppisite.

2005-SP 3.1

Tony
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Maybe make a config with a cut-extrude where you want it.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site (updated 06-21-05)

FAQ559-1100
FAQ559-716
 
Upvote 0 Downvote
Wow! I can't believe I brain farted like that, sorry. Thanks for the quick response.

-Tony
 
Upvote 0 Downvote
It happens. Your welcome.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site (updated 06-21-05)

FAQ559-1100
FAQ559-716
 
Upvote 0 Downvote
How do I insert a named view in dwt for SW20005?
 
Upvote 0 Downvote
sq20,
Please start a new thread for this question.
thanks

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site (updated 06-21-05)

FAQ559-1100
FAQ559-716
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CAD2015
  • Question
SOLIDWORKS: Cloud 3D CAD browser-based vs locally 3D CAD installed 5
Replies
8
Views
4K
drawoh
drawoh
Channo
  • Locked
  • Question
Need help with increasing poly count of 3D model
Replies
9
Views
864
3DDave
3DDave
CAD2015
  • Locked
  • Question
How to (simultaneously) move multiple non linked views in SolidWorks..... 1
Replies
2
Views
407
CAD2015
CAD2015
Platypusimon
  • Locked
  • Question
calculating the mass & volume of section of a part/assembly model in solidworks
Replies
10
Views
1K
jassco
jassco
jassco
  • Locked
  • Question
Solidworks VBA to GET and SET dimensions on a sketch in an assembly model
Replies
1
Views
2K
jassco
jassco

Part and Inventory Search

Sponsor

Back
Top Bottom