Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

section on different sheet 2

Status
Not open for further replies.
nitrocad

nitrocad

Industrial
Joined
Oct 1, 2008
Messages
16
Location
US
is there a way to place a section view on a different sheet than the view it was cut from in Inventor. and are there any other cut symbols available?
 
Sort by date Sort by votes
To put a section view on another sheet you need to drag and drop in the model browser. You must have the current sheet active then drag/drop to the new sheet.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Starker
  • Locked
  • Question Question
iProperty Function That Displays String Depending On Boolean
Replies
0
Views
815
Starker
Starker
imti7
  • Locked
  • Question Question
How to connect two solid sections tangentially in Inventor?
Replies
0
Views
916
imti7
imti7
G
New to this forum - convert sheet metal to solid doesn't work
Replies
0
Views
6K
gdgdad
G
Jack Henriques
  • Locked
  • Question Question
Question for any MEs working on PCB designs
Replies
0
Views
258
Jack Henriques
Jack Henriques
I
Will inventor work with athlon 3000g cpu 16gb ram 500gb ssd no gpu only cpu integrated praphics?
Replies
0
Views
5K
Isauro1616
I

Part and Inventory Search

Sponsor

Back
Top