Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seat Leakage for three way valve

Status
Not open for further replies.
trentar

trentar

Petroleum
Joined
Jul 12, 2011
Messages
49
Location
SI
Hay
ist there some special standard which describes seat leakage measurement for three way valve or should I use standard for two way valve like -ASME B16.34, -ANSI FCI 70-2, -EN 1349, -EN 12266-1, -IEC 60534-4?

Thanks


 
Sort by date Sort by votes
No specific standard for testing 3-way valve. Use 2-way standard like API 598, ISO 5208, MSS SP-61.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

TiCl4
  • Locked
  • Question Question
Valve Seat/Stem Material for Monomer Service
Replies
7
Views
2K
shvet
shvet
A
  • Question Question
Use of Gate Valve for Throttling
Replies
9
Views
3K
ASA2025
A
D
  • Locked
  • Question Question
Blow off valve allowable leakage rate calculation Class IV
Replies
6
Views
3K
goutam_freelance
goutam_freelance
Inchtain
  • Question Question
Seat Rings of small and big size ball valves
Replies
3
Views
3K
Danlap
Danlap
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar

Part and Inventory Search

Sponsor

Back
Top