Does anyone know where I can find a relatively inexpensive ulta-low friction ball bearing with 5/16" bore. My application demands really low friction under 10 rpm, room temperature environment. i have tried a skateboard bearing called Bones, Swiss Ceramic @ $15.00 each. The bearing is ok but my competitors are using bearings that are even better. Any help on locating a possible source?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Searching for ultra low friction ball bearing with 5/16" bore
- Thread starter hydrobro
- Start date
GregLocock
Automotive
Use a self aligning ballbearing.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Need more help? Try posting in the "Bearing design, manufacture and maintenance" forum
[link ]
![btn_liprofile_blue_80x15.gif" width="80" height="15" border="0" alt="View Clyde's profile on LinkedIn](http://www.linkedin.com/img/webpromo/btn_liprofile_blue_80x15.gif" width="80" height="15" border="0" alt="View Clyde's profile on LinkedIn)
[/url]
[link ]
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
- Locked
- Question