Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Screw Vendor (1-64 UNC)

Status
Not open for further replies.

clun

New member
Joined
Feb 3, 2003
Messages
37
Location
HK
Does anyone known the vendor who have 1-64 UNC screw with length of 3/8 inch? Thanks for help.
 
I think you need to "better" define your bolt. Then I would suggest the yellow pages under bolts / fasteners
 

They have your 1-64 UNC x 3/8" machine screws in 18-8 sst... I just checked. A pack of 100 pan head phillips screws cost $9.58 USD.

Wanna Tip? faq731-376
"Probable impossibilities are to be preferred to improbable possibilities."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top