schematic symbol standards 1

[larryg]

Hi all,

Would anyone know if there is a standard for schematic symbols, and if so, what would that standard # be?

Thanks in advance,

LarryG

 

[SteveSmith]

Get a copy of ANSI Y32.2-1975(IEEE Std 315-1975 & CSA Z99-1975) from Global Engineering Documents

http://global.ihs.com/.

It cost $72 USD. Steve Smith
Product Engineer
Staco Energy Products Co.

http://www.stacoenergy.com

 

[larryg]

Hi Steve,

Many Thanks! I believe I had that standard at a previous job and for the life of me could not remember what it was. I also had no luck searching for it either.

Thanks,
LarryG

 

[jbartos]

Suggestion: Try

http://www.ieee.org

for IEEE standards

http://www.ansi.org

for ANSI standards

http://www.nema.org

for NEMA standards

http://www.iec.ch

for IEC standards

http://www.nfpa.org

for NFPA standards
all sites have some standards for electrical or electronic or both schematic symbols. The are not exactly the same. You have to know what you need else you may be on a wrong side with a plenty of work ahead to redo things.