Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Schedule 40 and 10 pipe

Status
Not open for further replies.

cdafd

Specifier/Regulator
Joined
Aug 18, 2005
Messages
2,953
Location
US
One other ballpark figure


Cost of
One hundred feet of schedule 40 four inch

One hundred feet of schedule 10 four inch

Thank you
 
Quicker and more accurate for you to check into Mean's Estimating Manual or call a local supplier. Prices vary depending on whether the pipe is black iron, stainless steel, aluminum.
 
Should have said black iron
Above ground pipe, normal stuff found in most buildings

Just wanting a rough figure, for my info only.
 
4" Dynaflow Black 21' Joints $330.00 per 100'
4" Sch 10 Black 21' Joints $375.00 per 100'
4" Sch 40 Black 21' Joints $690.00 per 100'

With the coating Dynaflow is not only the least expensive but the superior product.

You can purchase a little cheaper if you purchase by the truckload and don't break bundles quantities.
 
Thank you

That is what I needed just for my info
 
Pipe prices change daily and more changes coming.

Eric Hendrix, SET
NICET Certified
Design Manager
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top