Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Scaling in Valves

Status
Not open for further replies.
AChatwin

AChatwin

Chemical
Joined
Sep 6, 2006
Messages
3
Location
SA
Hello,
I have to somehow correlate the potential scaling in two different axial flow valves. Does anyone have any good ideas to how to proceed on this?

Any advice and suggestions would be most welcome.

Thanks
 
Sort by date Sort by votes
Pressure drop through the valves linked to the PVT behavooir of the fluid?
 
Upvote 0 Downvote
There is a pressure drop difference between the two valves. It is about 10kPa difference. The question is how to quantify the difference between the two. I think the scaling difference will be neglible.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jone k
  • Locked
  • Question Question
In Diesel unit what’s the important
Replies
0
Views
808
Jone k
Jone k
Petroquito
  • Locked
  • Question Question
CDU overhead wash water injection quill plugging
Replies
7
Views
6K
0707
0707
Lowrentstuff
  • Locked
  • Question Question
Increasing Raw Natural Gas Dew Point and Molar Flow Rates
Replies
10
Views
1K
MortenA
MortenA
Jone k
  • Locked
  • Question Question
In Hydrocraker unit, two stages and
Replies
2
Views
456
Jone k
Jone k
padovano
  • Locked
  • Question Question
Fire in the Refinery
Replies
6
Views
618
padovano
padovano

Part and Inventory Search

Sponsor

Back
Top