Saving from Creo 2.0 to Pro E 5.0

[ruengineer]

Does anyone know if you can save from Creo 2.0 down to Pro E 5.0? I have found that we are working with some other Engineers who only have Pro E 5.0 and they can't open my files because I am working in Creo 2.0. Please help if you can!!

Thanks,

-R

 

[looslib]

PTC has a module called GCRI that you can add to WF5 to enable it to open Creo2 files. It is version specific and must be downloaded from PTC.com. You will loose associativity of new features that WF5 does not know how to resolve, but you will have the full solid model.



"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[looslib]

http://www.ptc.com/products/granite/gcri/index.htm

http://www.ptc.com/products/granite/gcri/free-download.htm

Creo 2.0 GCRI Support for Creo 1.0 and Wildfire 5.0
The .dlls are now included as part of the Creo installation can be found at the following location
<loadpoint>\Common Files\<Datecode>\<machine_type>\gcri\readnewermodels.dll




"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli