Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sanitary Sewer Design

Status
Not open for further replies.
phxeng

phxeng

Civil/Environmental
Joined
Nov 21, 2002
Messages
1
Location
US
How do you convert WFU (waste fixture units) to a unit of flow, such as gpm?
 
Sort by date Sort by votes
In the CABO, One and Two Family Dwelling Code, Table P 2409.3 may be used:

Load Flow
wsfu gpm
2 2.0
4 3.8
6 5.1
8 6.5
10 7.7
12 9.0
14 10.4
16 11.6
18 12.7
20 14.0
25 16.8
30 19.5

Good Luck
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AKSherpa
  • Locked
  • Question Question
On-Site Wastewater Sewer Rock
Replies
2
Views
613
Compositepro
Compositepro
TDean42
  • Locked
  • Question Question
Brick Storm Sewer Culvert Connection
Replies
3
Views
782
bimr
bimr
Penpendrum
  • Locked
  • Question Question
Rerouting and existing building to reconnect to an existing building sewer
Replies
8
Views
6K
Penpendrum
Penpendrum
Blackfairy
  • Question Question
Design of Asphalt Pavement without Subbase
Replies
7
Views
5K
fel3
fel3
M
  • Locked
  • Question Question
Semi raft design etabs
Replies
3
Views
2K
Ammaniya
A

Part and Inventory Search

Sponsor

Back
Top