Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sample specs? 2

Status
Not open for further replies.
sdz

sdz

Structural
Joined
Dec 19, 2001
Messages
586
Location
AU
I have been asked to write a specification for a topographic? survey (ground level) and tie in survey for a project.
I would have hoped the company would have a standard survey spec I could have started from but they don't, and I haven't much experience in this area; and neither does anyone else in the company.
Does anyone have or can direct me to a spec I could use as a starting point?
 
Sort by date Sort by votes
Do a search on google for ALTA/ASCM Survey Specifications. This spec is weighted towards the boundary aspects of surveying, but includes requirements for topography. There is a base specification plus a number of optional items. It is commonlay referred to as an ALTA Survey and is often required by lending institutions and Title Insurers. ALTA stands for American Land Title Association.
 
Upvote 0 Downvote
You should also check with your state registration board for surveyors as they may have some minimum standards for surveys!!
 
Upvote 0 Downvote
I tried "survey" but nothing interesting came up.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top