Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Salt Spray Solution

Status
Not open for further replies.
AeroIndah

AeroIndah

Aerospace
Oct 15, 2003
4
Hi,
Can somebody enlighten me on the requirement of chemical composition for NaCl.The grade I'm looking for is extra pure and ASTM B 117 specifies that the salt used shall be free of nickel and cooper and contains not more than 0,1% of sodium iodide and max 0.3% of total impurities.I need to know how to establish other elements/compounds not specified.These are required for Salt Spray analysis for Sulfuric acid and Chromic acid anodizing(AMS 2470 & 2471).Thanks for advise.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Morton Food Grade 999 meets the requirements of ASTM B117. It is 99.9% pure. They will provide a C of A with each shipment.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom