I have a customer that is insisting on building a product out of sheet produced to the SAE 30304 specification, which is sheet I can not find. The specification common to our operation is ASTM A240 Type 304. My question is: does ASTM A240 Type 304 meet the requirements of SAE 30304?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SAE 30304 VERSES ASTM A240 TYPE 304
- Thread starter 65X55
- Start date
SAE 30304 sheet is specified in a series of standards, such as AMS5910 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength. You can learn more here:
Regards,
Cory
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
Regards,
Cory
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question