pityu
Mechanical
- Jan 9, 2003
- 1
Hi,
I am designing a proprietary nut 1/2-13NC. Can not find a shear strength for material SA516-70.
Is the following formula OK for internal thread stripping area:
Asn=3.1415*Le*Ds min*n*(1/(2*n)+0.57735*(Ds min-En max))
Thank you.
I am designing a proprietary nut 1/2-13NC. Can not find a shear strength for material SA516-70.
Is the following formula OK for internal thread stripping area:
Asn=3.1415*Le*Ds min*n*(1/(2*n)+0.57735*(Ds min-En max))
Thank you.
