Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SA-193 B8 bolts desingation

Status
Not open for further replies.
Muhammad Ijaz

Muhammad Ijaz

Mechanical
Joined
Apr 8, 2005
Messages
30
Location
PK
Dear Sir,

Please confirm that "SA-193 Gr. B8" bolts means only "SA-193 Gr. B8 Class 1" bolts or it may be "SA-193 Gr. B8 Class 2".

Regards
 
Sort by date Sort by votes
Technically, neither, since gr B8 has 4 classes. Refer to table 1 of SA-193. If neither is specified, Id assume class 1, but thats me. Someone else may think different and assume B8-2 if thats his typical scope of work. Just specify it as B8-1 or B8-2.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

L
  • Locked
  • Question Question
SA 350 Flange Manufacturing
Replies
7
Views
5K
lt34
L
Mech-Engineer
  • Locked
  • Question Question
SA-335 Grades
Replies
10
Views
1K
weldstan
weldstan
F
Minimum requirements mechanical testing of SA105 forgings
Replies
3
Views
8K
David3399
D
FrancoisY
  • Locked
  • Question Question
What is this SAE?
Replies
2
Views
2K
FrancoisY
FrancoisY
Radius1
  • Locked
  • Question Question
Looking for specification for identifying pearlite in cast iron sample.
Replies
0
Views
2K
Radius1
Radius1

Part and Inventory Search

Sponsor

Back
Top