boldfish
Mechanical
- Jan 29, 2003
- 101
Can anyone provide vendor info/source for Polyphenylene Sulfide (ryton pps) raw material. I am looking for bar stock to machine prototypes.
OR
Any advise on a suitable alternative - high temp, ease of machinability, etc.
The final parts will be molded (ryton lends itself well to molding) and subsequent part families would be machined from the molded part.
OR
Any advise on a suitable alternative - high temp, ease of machinability, etc.
The final parts will be molded (ryton lends itself well to molding) and subsequent part families would be machined from the molded part.