Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RV Testing Equipment

Status
Not open for further replies.
Nov 9, 2007
2
Hi everyone, First of all let me thank Eng-Tips for letting me join this brilliant community, and also does anyone have any schematics on RV testing rigs, as the company I currently work for are going to atempt to build some small rigs.


Many thanks in advance.

Steve
 
Replies continue below

Recommended for you

Are you going to be testing certified relief valves? If you are, then you need to be certified by your particular organization, e.g. ASME. Otherwise, you will probably be violating law.
 
Yes we are certified, as we have been doing RV's for some time, we mainly use our rig made by ventil, but want to make some smaller rigs whilst in the middle of shutdowns.

Thank you for your speedy reply.

Steven
 
There are several configurations which may be used for such testing. The type depends on whether you want to test Air/Gas or Liquid or Both. Low Volume Test Equipment presents some problems, but it is doable if you have experienced mechanics operating the equipment.

JAC
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor