Rotating machine requires an Industrial Camera, instead of having a seperate video screen I would like to add it to our touchscreen (Versaview1500P)I figure we need a frame grabber(1/2 height PCI video card) and some active X software to connect the images to a window within RSView32.
Does any one have any ideas or comments on the required hardware and software.
The machine has a traverse that cannot be watched during rotation, we used to do this with an Burle security camera but I found that the Burle Video monitor was ugly and required a lot of room. The operator just wants to monitor how the product is traversing and perhaps make slight adjustments.
Thanks in advance for any replies.
Does any one have any ideas or comments on the required hardware and software.
The machine has a traverse that cannot be watched during rotation, we used to do this with an Burle security camera but I found that the Burle Video monitor was ugly and required a lot of room. The operator just wants to monitor how the product is traversing and perhaps make slight adjustments.
Thanks in advance for any replies.