rotary deburrig tool

[grunt58]

Any one know of a pneumatic deburring tool like this (see link) that isn't actuated by a hand lever? I'd like the same style but to acuate it via a solenoid valve signaled by a robot. The robot will present the part to a degating fixture. Google has not been helpfull.

http://www.dynabrade.com/cgi-bin/Industrial/51300?aFGgv39d;;116

Thanks


Grant
Applications Engineer
SW2006 SP 3.4
IBM InteliStation Pro M
P4 3.4 GHz, 2GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1100

 

[nbucska]

You have to attach the tool to the robot; attach it with
a clamp so that the hand lever is pushed-in or

use duct-tape to disable it or

take it apart and fix the valve into open position or

Tie the lever to the body temporarily with e.g. tape
and inject epoxy to fix it in this pos\ition. After
the epoxy sets, you can cut off the handle.



Plesae read FAQ240-1032
WEB: <

http://geocities.com/nbucska/>

 

[tygerdawg]

Ingersoll-Rand Air Motor division.

TygerDawg

 

[machmech]

Hello Grunt

This you might find more appropriate do not need to deal with air solenoid or hose, possibly use output on plc of robot.

http://www.robotcombat.com/marketplace_dewalt.html

 

[machmech]

Oops forgot to mention, go to bottom of page