Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RH2B-UT AC120

Status
Not open for further replies.

JTrujillo

Electrical
Joined
Nov 6, 2004
Messages
1
Location
US
I am conneting reversable motor to a RH2B-UT AC120 DPDT relay to make the motor compatable with a 120 volt output on a PLC and need to know how connect it. Any input?
 
The details of the DPDT relay are pretty much irrelevant because most of us know how the contacts are configured.

How about some detail of the motor:

The PLC switches 120V - AC or DC?
The motor is reversible - how?
What type of motor is it - PMDC, series DC, shunt DC, synchronous, universal, shaded pole, split phase, cap start, cap start & run....?




----------------------------------

If we learn from our mistakes,
I'm getting a great education!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top