Revision Table Description disappearing in PDM

[LesPaul82]

I made a revision to a drawing and checked it into PDM. I used the revision table. Now when I check out this drawing to make another revision, the description in the revision table is missing. This happens everytime I do this. all the revision symbols are there as well as the revision letter on the title block. Any ideas?

Sean Nutley
Carmanah Design and Manufacturing
Vancouver, BC, Canada

http://www.carmanahdesign.com

 

[ctopher]

Does it show on print preview or on the hard copy print?

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP2.0 / PDMWorks 05
ctopher's home site
FAQ371-376
FAQ559-1100
FAQ559-1091
FAQ559-716

 

[LesPaul82]

No its gone completely. I have to rewrite it in again. It seems to disappear as soon as its checked into PDM. When you view the e-drawing view form within PDM it's not there either.

Sean Nutley
Carmanah Design and Manufacturing
Vancouver, BC, Canada

http://www.carmanahdesign.com

 

[SolidsMaster]

Do you have revision table enabled in the PDM admin?? There is an option for visible rows too. check that out, the two are connected.

John

 

[ctopher]

My same thought as SolidsMaster, assuming you ARE using PDM-Works. Let us know if his suggestions works. If not, maybe your video card or something else? Also check your rev template.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP2.0 / PDMWorks 05
ctopher's home site
FAQ371-376
FAQ559-1100
FAQ559-1091
FAQ559-716

 

[LesPaul82]

Revision table is enabled and the visible rows are set to 5. How do I check my rev template?

Sean Nutley
Carmanah Design and Manufacturing
Vancouver, BC, Canada

http://www.carmanahdesign.com