Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Restriction Orifice

Status
Not open for further replies.
brighton6

brighton6

Petroleum
Joined
May 22, 2006
Messages
2
Location
AU
Guys,

I want to use a RO in a condensate line of class 300#. I want to machine off a 150# flange to make this RO. Does anyone of you have any experience and can give some advise?

Regards,
Ibrahim
Minerva Gas Plant
 
Sort by date Sort by votes
What is line diameter? For small sizes (1.1/2" and smaller) you can use a stainless steel spade 3mm thick. For sizes 2" and higher the thickness shall be calculated. In ASME B31.3 You will find a fórmula to calculate the required thickness.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Question Question
Potential for hydraulic transients with liquid restriction orifice isenthalpic expansion
Replies
12
Views
1K
goutam_freelance
goutam_freelance
W
  • Question Question
Orifice for dump line to liquid tank
Replies
10
Views
9K
Whatsanolet
W
AHickman
  • Locked
  • Question Question
Calculating flowrate out of orifice
Replies
14
Views
2K
Snickster
Snickster
L
  • Locked
  • Question Question
Calculation of Orifice Diameter for Flow Restrictor (OF) in a Semiconductor Vertical Furnace System
Replies
7
Views
5K
georgeverghese
georgeverghese
JoeSeag
  • Locked
  • Question Question
Orifice tap max loads?
Replies
7
Views
656
KernOily
KernOily

Part and Inventory Search

Sponsor

Back
Top