Resize Curve NX9 with Use Curve Finder

[PSI-CAD]

Hi,

Open the part resize_curve.prt then activate the sketch

Try to use Resize Curve

1°) Select one arc then Equal Radius in the Tab Result: 9 arcs are selected

RESET

2°) Select Equal Radius in the tab Setting then one arc: 10 arcs are selected

One arc is missing with the first approach

Am I wrong or is it a bug ?

Have a look a the video

Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[JohnRBaker]

I tried this using NX 9.0.1.3 (the MR which will be available in a few weeks) and this seems to now be working consistently, whether you select the 'Equal Radius' option before or after you select an arc. Note that I'm working from home today so I don't have access to the original NX 9.0.0.19 version of NX so as to verify that this may not have been working correctly in that version. You could contact GTAC as they might be able to verify this for you.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[PSI-CAD]

Ok John Thanks a lot. I will contact GTAC

Regards
Didier Psaltopoulos

http://www.psi-cad.com