Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Residual stress

Status
Not open for further replies.
ellethwen

ellethwen

Structural
Joined
Apr 4, 2016
Messages
1
Location
GB
Hello,

Is anyone familiar with modelling residual stresses and/or SIGINI subroutine?

The residual stress field I induce with SIGINI, disappears after the initial step of my analysis. Same thing happens when I try to induce residual stresses with an initial thermal analysis.

Any help would be greatly appreciated!
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
Sakthiiitm
  • Locked
  • Question Question
Regarding section forces and stress in a model
Replies
2
Views
592
Sakthiiitm
Sakthiiitm
abc123ali
  • Locked
  • Question Question
Output debonding stress problem
Replies
1
Views
359
FEA way
FEA way
S
  • Question Question
Stress values are more compared to experimental results and cracks are not formed on concrete for DOUBLE PUNCH TEST simulation in abaqus software
Replies
7
Views
5K
Shreyas M
S
P
  • Locked
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top