Lee.Conti
Automotive
- Nov 8, 2019
- 87
Hi,
I have a case that the metal rod being bent to L shape and continue to pull it.
There is no heat treatment and there should be residual stress after bending into L shape. If I run two analysis separately, 1. plastic deformation to get the total strain;2. max stress/ strain when the L hook being pull, then sum up the total strain for assessment?
I have a case that the metal rod being bent to L shape and continue to pull it.
There is no heat treatment and there should be residual stress after bending into L shape. If I run two analysis separately, 1. plastic deformation to get the total strain;2. max stress/ strain when the L hook being pull, then sum up the total strain for assessment?
