Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reporting forces at MPC

Status
Not open for further replies.
csllqeclcat

csllqeclcat

Mechanical
Joined
May 10, 2010
Messages
5
Location
PT
Hi,
I have a reticular structure made of beam elements. At each intersection of two beams there is a TIE MPC connection. I would like to report the forces acting on each MPC. Could anybody advice me about how to do this?
Thanks
 
Status
Not open for further replies.

Similar threads

jball1
  • Locked
  • Question Question
Extracting nodal forces
Replies
1
Views
1K
jball1
jball1
Sakthiiitm
  • Locked
  • Question Question
Regarding section forces and stress in a model
Replies
2
Views
582
Sakthiiitm
Sakthiiitm
mikylangel
  • Locked
  • Question Question
How can I fix this ABAQUS CAE error? “96 nodes are missing degrees of freedom. MPC/equation/kinemati
Replies
5
Views
1K
FEA way
FEA way
Gov45
  • Locked
  • Question Question
How to request sectional forces for shell elements in ABAQUS
Replies
1
Views
605
FEA way
FEA way
chinsan
  • Locked
  • Question Question
Nodal coordinates and the strains at the nodes
Replies
5
Views
742
chinsan
chinsan

Part and Inventory Search

Sponsor

Back
Top