Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Replacement of SDV with a second Check valve 1

Status
Not open for further replies.

Khansahib

Chemical
Joined
Nov 24, 2006
Messages
62
Location
US
Gas Injection is to be carried out at 3000 psig by compressing the associated gases. SDV is proposed on the downstream of pig launcher (at plant) as well as at the upstream of pig receiver at well site on the gas injection pipeline. I am of the view that two check valves will do the job and does not require and SDV at the well site. This option is also given in API-14C. Would appreciate your expert opinion.
 
10 Check valves could not replace a positive shutoff valve and mixing check valves and pigs is just plain asking for trouble. Don't even think about it.

"I think it would be a good idea."
- Mahatma Gandhi (1869-1948),
when asked about Western civilization
 
I strongly agree with BigInch - do not eliminate an ESDV!

Check valves are not a positive form of control and in any case, you only have single directional control. You must have control of the fluids in the facility at the battery limits.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top