Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removing rebars on concrete study

Status
Not open for further replies.
mcaruel

mcaruel

Mechanical
Joined
Dec 8, 2005
Messages
1
Location
FR
Hi all
I would like to know if there is a method using ABAQUS to remove a rebar in reinforced concrete during the analysis. I'm using rebar as element property in shell elements and I want to simulate loss of prestressing during a pressure loading on a pipe

Regards
Mat
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S
M
  • Locked
  • Question Question
Concrete friction
Replies
1
Views
2K
FEA way
FEA way
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
S
  • Question Question
Stress values are more compared to experimental results and cracks are not formed on concrete for DOUBLE PUNCH TEST simulation in abaqus software
Replies
7
Views
5K
Shreyas M
S
C
  • Question Question
Basalt Fibre Reinforced Concrete material properties in Abaqus
Replies
6
Views
3K
chrisb121973
C

Part and Inventory Search

Sponsor

Back
Top