smcadman
Mechanical
- Nov 6, 2002
- 1,589
First I would like to thank dezignstuff for his Toolbox guide because it helped us finally get our Toolbox shared. Rules of thumb > More Toolbox.
We add our parts with Toolbox > Add my parts wizard. I found out some of our parts were put in there twice. Let's say we have a part "8000". Someone else put that part, but it was a copy "8000 .25-20 Weld Tab". We do not want multiple versions of the exact same part (with different names), so I deleted the unwanted part from the server location.
Now Toolbox shows the missing parts name and a blank icon. How do I delete this, and for future reference, how am I supposed to properly delete a part from the Toolbox.
Flores
SW06 SP4.1
We add our parts with Toolbox > Add my parts wizard. I found out some of our parts were put in there twice. Let's say we have a part "8000". Someone else put that part, but it was a copy "8000 .25-20 Weld Tab". We do not want multiple versions of the exact same part (with different names), so I deleted the unwanted part from the server location.
Now Toolbox shows the missing parts name and a blank icon. How do I delete this, and for future reference, how am I supposed to properly delete a part from the Toolbox.
Flores
SW06 SP4.1