Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removal of Silica in the presence of Boron

Status
Not open for further replies.

robotengineer

Nuclear
Mar 1, 2000
8
Thanks all,<br>
I've heard rumors from time to time, of success removing silica in the range of 5ppb to 50 ppm in the presence of boron, which is usually leached from boroflex.structural components.<br>
Any experience, citations?<br>
Thanks
 
Replies continue below

Recommended for you

We have looked into this and there are several utilities using RO to separate Boron & Silica in Reactor grade water. Although other vendors may offer this technology, Diversified Technologies Services, Inc. has the most experience according to our research. They will provide you a proposal very quickly once you give them the info they request. Phone- (865)539-9000
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor