Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Release DOF of beam in Abaqus/Explicit

Status
Not open for further replies.
mendinho

mendinho

Civil/Environmental
Joined
Apr 14, 2007
Messages
39
Location
ES
Hello everybody,
I am trying to model a plate (shells) supported on rubber bearings and columns (beam elements) and I would like to know how to release rotational degrees of freedom at one or both ends of a beam element in Abaqus/Explicit.
Unfortunately, the keyword *RELEASE only works in Abaqus/Standard.
Thanks in advance for your kind help. Regards,

 
Status
Not open for further replies.

Similar threads

jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
807
FEA way
FEA way
jorge0894
  • Locked
  • Question Question
Restart analysis in Abaqus Explicit Error
Replies
3
Views
3K
FEA way
FEA way
M
  • Locked
  • Question Question
Abaqus/Explicit VUEL questions
Replies
2
Views
2K
macmallo
M
G
  • Locked
  • Question Question
Abaqus explicit - general contact problem
Replies
5
Views
18K
FEA way
FEA way
S
  • Locked
  • Question Question
facing error in Abaqus explicit simulation
Replies
3
Views
1K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top