I am getting the relationship conflict error and am wondering if there is somewhere on v17 that will tell me what relationships the conflict is with. Is there a dialog box or someplace to tell me so I do not have to keep "trying" different relationships until I find one that works.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
relationship conflicts
- Thread starter swhits
- Start date
beachcomber
Mechanical
You want the macro ARelDoctor.exe - in earlier versions it's in the
C:\Program Files\Solid EdgeVxx\Custom\ARelDoctor folder.
It will suppress each relationship in turn until the assembly loses the conflict.
Then just look for the suppressed relationship and correct it. I think it may also write a log file.
Can take a while on big assemblies,
beachcomber
C:\Program Files\Solid EdgeVxx\Custom\ARelDoctor folder.
It will suppress each relationship in turn until the assembly loses the conflict.
Then just look for the suppressed relationship and correct it. I think it may also write a log file.
Can take a while on big assemblies,
beachcomber
- Status