Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Relationship between ISO 1940 and AGMA 9000 cl 9 balance grades

Status
Not open for further replies.
nirlt

nirlt

Mechanical
Joined
Apr 14, 2007
Messages
14
Location
IN
This is regarding required balance grade for couplings.
Please explain the relationship between ISO 1940 and AGMA 9000 balance grades.

In case ISO balance grade (say 6.3) and AGMA 9000 balance grade (Cl 9)
both are specified, which one is stringent.
 
Status
Not open for further replies.

Similar threads

bsrd
  • Locked
  • Question Question
STC rating between apartment units.
Replies
3
Views
1K
Heaviside1925
Heaviside1925
Pankaj93
  • Locked
  • Question Question
Viberation test According to IS 9000 PART 8
Replies
2
Views
327
Pankaj93
Pankaj93
I
  • Locked
  • Question Question
Fan vibration and its effect on fasteners
Replies
5
Views
3K
dgeesaman
dgeesaman
M
  • Locked
  • Question Question
Detecting and Analyzing Noise in an Actuator
Replies
1
Views
2K
GregLocock
GregLocock
RyanWard
  • Locked
  • Question Question
Insertion Loss via Substitution Method (ISO 7235) Test Procedure Order
Replies
4
Views
510
RyanWard
RyanWard

Part and Inventory Search

Sponsor

Back
Top