Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Regulations in Japan 1

Status
Not open for further replies.

zappedagain

Electrical
Joined
Jul 19, 2005
Messages
1,074
Location
US
Does anybody know where I can find the RF and safety regulation for Japan?

I believe Japan uses the CISPR limits that are used in the European Union.

What about safety regulations?

I'm working with IT equipment for use in business environments (residential use would be nice but is not required).

PS: Is there a better forum to post a question like this?
 
A few years ago, UL (NY) used to have a resident MITI regulatory engineer [as well as VDE]. The electrical safety regulation is governed by MITI [Ministry of International Trade & Industries]. I had obtained MITI approval for products. They usually accept UL approval for safety, but there are labeling requirements. Also, the typical voltages is 100 VAC nominal and may not be grounded. Your safety approval can be handled via UL.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top