islam jamal
Chemical
can i install device alarm system for reformer process gas tube average Temp at each row
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reformer for Methanol plant
- Thread starter islam jamal
- Start date
- Status
- Thread starter
- #3
islam jamal
Chemical
The tubes in our methanol plant steam reformer ruptured because of overheating, and the investigation team recommended installation of UV flame detectors and install device alarm system for reformer process gas tube average temp at each row. I had bad experience with UV detectors in furnaces because they led to false alarms, trips and process disturbances. Can you please guide me on this issue?
georgeverghese
Chemical
This article describes the use of IR pyrometers for temp monitoring in steam reformers
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
