hi, I am fresh graduate chemical engineer working in refinery. any one guide me how to set the plant parameter preflash , furnace, CDU pressure and temperature how will decided this parameter, which factor is under consideration. please guide me and any document related this send me I am very thank ful to you
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
refinery
- Thread starter Siddz
- Start date
I suggest you ask the senior engineers at your facility (or at least within your company). The exact settings may vary somewhat depending on the process involved and the equipment installed.
Converting energy to motion for more than half a century
Converting energy to motion for more than half a century
in addition to above see section 5 in
georgeverghese
Chemical
Get a copy of the popular James H Gary - Glenn E. Handwerk book " Petroleum Refining". Also subscribe to Hydrocarbon Processing monthly magazine.
- Status
Similar threads