Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reference Points in Solidworks VBA Macros

Thread starter mainr
Start date May 18, 2007

Status: Not open for further replies.

May 18, 2007

mainr

New member

Within a macro, I need to acquire xyz info for "reference points" in a solidworks part. NOTE that this is "reference points" (i.e., points created with the tool on the reference geometry toolbar), NOT "sketch points". These points are not associated with any sketch (2D or 3D), and appear in the Feature manager tree at the root.

Thanks,
R. Main.