Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reference for radii for structural angle

Status
Not open for further replies.
dtwo

dtwo

Automotive
Joined
Oct 17, 2002
Messages
137
Location
US
Is there information available showing the radii for A36 structural angle?
 
Sort by date Sort by votes
I've seen "2x wall thickness" tossed around for outside radius on square tube, and "1x thickness" for the corner fillet on angle. Although I think it does (and is allowed to) vary by manufacturer and/or phase of the moon.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

theory2code2practice
  • Question Question
Code reference for greenhouses
Replies
10
Views
3K
haynewp
haynewp
S
  • Question Question
Structural Engineering books for donation
Replies
6
Views
7K
SSS148
S
Engineerataltitude
  • Question Question
good reference for alterations of existing reinf. CMU walls?
Replies
6
Views
10K
Harbringer80
H
just_some_shmuck
  • Locked
  • Question Question
I-beam edge radii
Replies
4
Views
4K
HTURKAK
HTURKAK
L
  • Question Question
Recommendations for Software Tools Using Structural Design Codes
Replies
0
Views
1K
Lauranmoreno
L

Part and Inventory Search

Sponsor

Back
Top