Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reducer Bush Fitting for Inert gas agent piping

Status
Not open for further replies.
Miyazaki

Miyazaki

Industrial
Joined
Sep 26, 2021
Messages
18
Location
IN
Hi All,

Could anyone please advise whether a reducer bush is allowed in inert gas piping because for halocarbons in most of the manufacturer manuals reducer bush is not recommended, this data I couldn't find in the inert gas manuals.

Can anyone please share with me some references stating why reducer bushes are not allowed in inert gas piping/clean agent piping.
 
Status
Not open for further replies.

Similar threads

C
  • Question Question
Clean Agent System
Replies
4
Views
810
Cris-w
C
jafary64
  • Locked
  • Question Question
Situation of Inert gas (CO2) Line
Replies
0
Views
359
jafary64
jafary64
morgan.z
  • Locked
  • Question Question
Friction loss for reducer in sprinkler calculation
Replies
6
Views
5K
morgan.z
morgan.z
C
  • Locked
  • Question Question
NFPA2001 GAS SUPPRESSION SYSTEM
Replies
7
Views
6K
DavidCR
DavidCR
C
  • Locked
  • Question Question
Corrosion resistant piping
Replies
4
Views
2K
mk3223
mk3223

Part and Inventory Search

Sponsor

Back
Top