Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recommendation for ANSYS and FEA training
- Thread starter Tunalover
- Start date
Tunalover,
Highly recommend AES ( I have used AES for consulting and training.
Best regards,
Matthew Ian Loew
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
Highly recommend AES ( I have used AES for consulting and training.
Best regards,
Matthew Ian Loew
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
PhilEduard
Mechanical
Also try PADT (Phoenix Analysis and Design Technology). They conduct training outside Phoenix and I believe mostly on ANSYS office too.
Phil
Phil
I don't know where you from but if you are in Canada I think ROI engineering inc They have office in Toronto and in Montreal. In Montreal M. Semler and his team are very great yes M. Semler have a PHD but he know his software very well and he is a simpatistical person who inspire confiance. Me I recommand him and in US sorry I can't help you.
Good Look my friend
Francois
Good Look my friend
Francois
- Status
Similar threads
- Question
- Question
