Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recognize sheetmetal object

Status
Not open for further replies.
abeschneider

abeschneider

Mechanical
Joined
Sep 25, 2003
Messages
189
Location
US
I'm having trouble using the "Recognize" tool in Catia V5R16. I have an extruded part of uniform thickness which consists of two tangential circular bends. (There is no "flat" straight section on the part, other than the thin sides.)

I haven't been able to figure out how to take this part and "Recognize" it as a Generative Sheet Metal part.

Any tips?
Thanks.
 
Status
Not open for further replies.

Similar threads

A
sheetmetal design problem
Replies
2
Views
2K
arca
A
CarlosR2022
  • Locked
  • Question Question
3Dx SectionService Runtime-Error '430' when set the object
Replies
0
Views
383
CarlosR2022
CarlosR2022
dctene2
  • Locked
  • Question Question
Macro To Extract A Surface In Space (& Understanding Selection Object)
Replies
3
Views
1K
dctene2
dctene2
Yuvraj026
  • Locked
How to differentiate the product and Component object fro assembly product list. On CATIA V5 , using c#.net API
Replies
5
Views
3K
yamaCad
Y
kuleszajmk
  • Locked
  • Question Question
Object doesn't support this property or method - partDocument1.part
Replies
0
Views
259
kuleszajmk
kuleszajmk

Part and Inventory Search

Sponsor

Back
Top