How does the NEC apply to a standard 120v receptacle in a metal singlegang jbox mounted to the backplane inside of a metal control panel enclosure mounted to a large (1/2"thick x 8"sq metal tube structure) fixture? There is 120vac coming in to run the panel and controlled equipment, and the receptacle would branch directly off the incoming wires. A dedicated 10A fuse is in line with the hot wire. From the incoming supply wires, it will be about a foot of 12AWG wires into the jbox.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
recepticle in control unit enclosure
- Thread starter thekman
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question