Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Receiver connector for TA-1035/U

Status
Not open for further replies.
Originary

Originary

Electrical
Joined
Jun 20, 2008
Messages
2
Location
US
I have been scouring forums and all the search engines I know of to find this connector. If anyone knows of the connector for the DNVT or DSVT that would be great. I would like to add it to a military design I am working on but I can't seem to find any variation of it, 3-pin, 5-pin, or 6-pin. I may be reaching a bit here but if there are any catalogs out there that contain all this information that would be excellent.

Thanks,
 
Status
Not open for further replies.

Similar threads

C
  • Locked
  • Question Question
minimum cover for schedule 80 pvc
Replies
3
Views
4K
CarlB
CarlB
L
  • Question Question
Moisture content of subgrade/subbase for next layer
Replies
3
Views
7K
EireChch
EireChch
Lanza
  • Question Question
Load capacity for a machine on a concrete slab.
Replies
2
Views
926
JAE
JAE
G
  • Locked
  • Question Question
Abaqus General Contact for Concrete Simulatilns
Replies
1
Views
2K
SWComposites
SWComposites
SandyBill
  • Locked
  • Question Question
Looking for threads relating to best practice/calcs for building temporary supports for mobile struc
Replies
6
Views
1K
bimr
bimr

Part and Inventory Search

Sponsor

Back
Top