Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reapir welding of ASTM A276 super duplex stainless steel

Status
Not open for further replies.
qualitypro

qualitypro

Mechanical
Sep 30, 2003
91
Pump shaft material is ASTM A276 S32760 and is damaged during operation. We have an approved weld procedure from the pump supplier. Can the shaft be repair welded by overlay and machined to bring it back to the original condition? Are there any precautions to be taken while welding duplex ss? or
Is it advisable to just replace the shafts?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
See same post in metallurgy.

= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
934
Muhammad Ijaz
Muhammad Ijaz
qcrobert
  • Locked
  • Question
How can steel manufacturer chemical composition differ from ASTM/ASME chem comp? 2
Replies
5
Views
910
qcrobert
qcrobert
Wickerfields
  • Locked
  • Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
963
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Andrewstructure
  • Locked
  • Question
Cast Steel - Johnstown Works Grade SX, .10-.20 C
Replies
0
Views
658
Andrewstructure
Andrewstructure

Part and Inventory Search

Sponsor

Back
Top Bottom